Thanks for the reply from the engineer, one more question: I put can file
wrong, it jumped back mileage. Then i try make again, but cannot read or write.
Can the simulator only change the mileage once?
Yanhua engineer replied:
The simulator can modify the mileage many times, but chip soldering is not an
easy task. If the chip is soldered many times, the chip is easy to break.
It is recommended that you check whether there is a problem with the
soldering of the chip. If there is no problem, you should consider whether the
chip is damaged.
Yanhua Mini ACDP BMW CAS1 CAS2 CAS3 CAS3+ CAS4 CAS4+, FEM /BDC, BDC2 Coverage (from 2000 to 2019). Mini ACDP has odometer correction and key programming capabilities. Here comes a table of Yanhua Mini ACDP BMW coverage:
I took 2 screenshots from the above table， you can click on to enlarge them.
Note: After 2013 year, a partial of CAS3+ begin to use CPU 0M23S
Note: So far FEM module is available with two versions, X5 is the newest version, the can filter is connected at the back of the dashboard, Yanhua Company has no wiring diagram at present.
Yanhua ACDP basic module + module 6 + PCF-key adapter is one solution for VAG MQB all keys lost programming without soldering. This post is on how to operate.
Yanhua Mini ACDP BMW package for IMMO & Cluser is available to meet more and more users’ need. If you are interested in Mini ACDP BMW package, you come into the right page, it answers 4 W’s and 2 How’s: What include, Why user prefer to Mini ACDP, Who use, where to buy, how much does it cost, how to use, as well as users’ feedback.
Here we go:
What does Yanhua Mini ACDP BMW full package include?
1). ACDP Programmer Basic Module:
Support 93 /24/ 25 / 35/ 95 Series EEPROM in circuit programming (ICP) and on adapter board programming (OBP), and parts of Freescale / NEC MCU in circuit programming（ICP）. This module is a necessary basic configuration for other modules.
2) CAS Module (module 1)
(1) Support CAS1 – CAS3+ IMMO key programming by OBD or ICP mode, Mileage reset, Read/Write EEPROM and FLASH data.
(2) Support CAS4/CAS4+ IMMO key programming in circuit programming (ICP), Mileage reset, Read/Write EEPROM and FLASH data.
3) FEM / BDC Module (module 2)
Support FEM/BDC IMMO key programming by ICP or OBP mode, Mileage reset, Recover/Backup data.
4) ISN Module (module 3)
Read/write N20/N55/N13 ISN code via OBD.
Read/write MSV80/MSD85 ISN code without opening DME shell.
Read/write other DME ISN code by opening DME shell.
5) 35160 Module (module 4)
Can erase/adjust mileage of 080DOWQ/T,160DOWQ/T EEPROM.
6) Refresh BMW key (module 7)
Refresh BMW E chassis/F chassis key to make BMW keys can be used repeatedly.
7) FRM module (FRM Footwell module) (module 8)
Read and write BMW FRM module (FRM Footwell module) 0L15Y chip EEPROM/FLASH data. Read and write 3M25J chip EEPROM/D-FLASH/P-FLASH data.
Why Yanhua Mini ACDP BMW full package? Who use Yanhua Mini ACDP?
1)
No need to remove chip No need soldering No need to cut the line No need to lift the pin
That means, it is very easy to use, friendly for the junior users and medium users.
If you are a boss or a shop owner, you used to pay higher labor cost for a qualified welder, with Yanhua Mini ACDP, a skilled worker can do the same job.
How much does Yanhua Mini ACDP BMW full package cost?
Yanhua Mini ACDP BMW package feedback on BMW CAS1-4+ key programming, BMW FEM/BDC IMMO key programming, ISN read and write.
I got it since a week and i am excited M35080 Programming needs some improvements, there are some bugs (tested on 4 dashs, and it’s better to desolder) Serial EEP 24XX, 25XX, 93XX, 95XX works like a charm (but tested on only 3 Eeps) Tried several CAS4 to Read without any problems, Mileage reset works too CAS3 tested only 1 but readed without problem On a another group they reported to create successfully keys on FEM/BDC and CAS4
Reading eprom cas4 and make a key for f11 so far done.
cas4 reading eprom compared with vvdi reading and its matching 100%.
All other 35080/160 are possible, like all other programmer can do also. ACDP is also working with smartphone tethering so a router is not a must. Didn’t test if it works offline,
Fem key making and mileage reset is confirmed by other users in WhatsApp group, I can confirm mileage reset cas3/3+/4, key making cas3/3+, key 868mhz refresh and frm programming.
I have it and have had it for more than 3 months now. It works perfect on all CAS types and for AKL but for FEM and BDC it still has a long way to go. Its also compitable via bluetooth so not only wifi is needed. Its a great and small tool, easy to use, compared to VVDI, R70, Upa and etc.
Tested the Mini ACDP here with 4 CAS3 and one CAS4+ without any problems. For the first CAS3 I needed more than 5 minuntes to place the pins correctly but after some experiences I needed only 30 seconds for everything. Important is that you use the small screw tools to clean the contacts.
BMW 5 series CAS4 2015 OK.
Questions and Answers:
Q: But sometimes it’s tricky to place the probes correctly, it’s faster to use other programmer until you have figured out how to place probes correctly.
A: The newest version (09-19-2018)ACDP with improved CAS3 and CAS4 board fix the problem that it’s difficult to place the probes correctly.
Q: For FEM/BDC I use my Autohex II and for eeproms my other stuff like R27, Codiprog USB mk2 and Orange5.
A: For FEM/BDC, 3 months ago, it needed FEM electric bridges to complete. Now update Mini ACDP to the newest version, it won’t need the electric bridges any more, it is easy to use.
How to use Yanhua Mini ACDP BMW software?
Here I Take several Youtube Videos for example.
Yanhua Mini ACDP BMW FRM Data Recovery in Automatic mode
Yanhua Mini ACDP read BMW CAS4
Yanhua Mini ACDP add key for BMW CAS4
Yanhua mini ACDP add a working BMW FEM BDC Key
How to use Yanhua Mini ACDP VW MQB do Key Programming without soldering
- Check the crystal oscillator package of BCM module: EXT1 short - circuited for ceramic packaged crystal oscillator, EXT2 short-circuited for metal packaged crystal oscillator
- Save the chip data read by the BCM module according to the software tips
Pin detection status:
When EXT contact is bad, check the EXT1 pin if the crystal oscillator is ceramic packaged or EXT2 pin if it’s metal packaged
It’s detected that the BCM module chip has been encrypted. Continue
Disconnect the OBP+ICP adapter and ACDP device firstly.
- Connect the ACDP device, OBD+ICP adapter, BCM interface board and BCM module
- Check the crystal oscillator package of BCM module: EXT1 short - circuited for ceramic packaged crystal oscillator, EXT2 short-circuited for metal packaged crystal oscillator
Pin detection status
It’s detected that the BCM module chip has been encrypted
Check the key information
Adding key completed
Pls install the BCM module back to the vehicle to confirm that the new key can be used normalyy
