Yanhua Mini ACDP 2009 -2018 Volvo Key Programming: Tested Working

Yanhua Mini ACDP developed Module 12 to program key for Volvo Semi-smart (5-button key) . And Volvo fully-smart (6-button key) key programming is developing. Yanhua Mini ACDP program Volvo key without desoldering. It covers Volvo from 2009 year to 2018 year.


ACDP can program the following Volvo semi-smart (5-button key):
S60 (2010 -2018)
S80 (2009 -2016)
XC60 (2009 - 2018)
V60 (2011- 2017)
V70 (2009 -2016 )
XC70 (2010 -2016)


ACDP has the following Volvo IMMO functions:  
Read password
Add key
All key lost
Unlock key



Yanhua Mini ACDP can program Volvo keys without lifting and desoldering:

1. Prepare ACDP, OBP+ICP adapter, CEM interface board and CEM module.

2. Clamp two PCB locks.

3. Link ACDP and CEM module.

CEM position in the Volvo car.


This is the ECM module removed from Volvo car.

Unlock key Help:
Please put the Volvo key into the BAV adapter and unlock it with the CEM password file loaded when the key is matched.


Youtube video:
Comming soon....

Yanhua Mini ACDP Key Programming Volvo Module for  sale：
http://www.obdexpress.co.uk/wholesale/yanhua-mini-acdp-key-module-volvo.html
Please enjoy.

www.obdexpress.co.uk


Source:
http://blog.obdexpress.co.uk/2019/06/26/yanhua-mini-acdp-2009-2018-volvo-key-programming/

YH35XX programmer + Simulator correct 35128 odometer: No red dot

F chassis 35128WT eeprom odometer correction best solution: Yanhua YH35XX programmer + Simulator, because it has no risk, no red dot and easy to use. It wins many similar tools i.e Smelecom 35128 emulator (supports a part of 35128WT eeprom) and VVDI Pro (can't work yet).
Steps:
Prepare: one computer
Features: No risk, no red dot. Easy to use.

1. Remove the original 35XX EEPROM from the odometer and solder it to the adaptor board.Then clamp the adaptor board with the solder-free clamp. Ensure the direction of the adaptor board and solder-free clamp is correct.

2.Connect the YH35XX programmer to the USB port of the PC, click on "computer" and it will recognize a usb flash drive named 35XX programmer.



3.Click on U disk35XXprogrammer, double-click "BMW_ODO_Standard_edition. exe" to open the software.

4.Wait until it pops up: Programmer connection successful, then run it.


5.Choose the EEPROM model and click on "Read DATA+ID", check whether the mileage that is read out is the same as the actual mileage.

6.Click on "Save Data File", save the original data of original EEPROM to the folder.


7.Hold the handle of the simulator, clamp the Simulator with the solder-free clamp. Pay attention to the direction. Then connect the solder-free clamp to the programmer, connect the programmer to the PC.


8.Choose the EEPROM model, click on "Load Data File", choose the corresponding data of original EEPROM and load it. Check whether the displayed mileage is the same as the mileage displayed in odometer.


9.Once the mileage is confirmed, click on "Write DATA+ID", write the original data into the Simulator.

10.Click "Read Data+ID", read the data written into the Simulator, and check the mileage.

11.After the mileage is confirmed, click on "Mileage modification" and input the mileage you want.


12.After confirming the input mileage is correct, click on "Write DATA+ID" to write the modified data into the Simulator.


13.After the data is written, click on "Read DATA+ID" to check whether the mileage modification is correct.


14.If the displayed mileage is the same as what you want, cut off the handle of the Simulator, and solder the Simulator to the original EEPROM position. Pay attention to the EEPROM direction. Install the odometer back to the car to verify whether the mileage modification is successful.

Yanhua YH35XX programmer + Simulator tech support is always available at
www.obdexpress.co.uk
http://www.mileageprogrammer.com/yh35xx-programmer-simulator-correct-odometer/

Yanhua Mini ACDP: How to set the board on the cas 4?

Using Yanhua Mini ACDP, how to set the board on the cas 4 so that the pins align and also how to lock the board into the cas?

Just follow this video to do in step by step:


As you can see, yanhua mini acdp adds a new CAS4 key in the way of ICP instead of cutting line, remove components, lift pins etc.

Prepare:
1) Yanhua Mini ACDP package (mux, OBP+ICP, BDM01, 20 pin cable, CAS4 adapter, BAV-KEY adapter)
2) Working key
3) Key blank


Words and images:
Dismantle CAS4 from the car
The CAS is located under the steering wheel

Dismantle the CAS module


Part 1: Connection
Setup the copper pillar
Find the location hole D1-D4

Enlarge drawing.


Setup the interface board.


Skills: Aim for D1-D4.




Vertical press down the interface board.

Lock the board with copper pillar.

Clamp the board with PCB lock.

Connect the ICP + OBP adapter, BDM01 adapter, CAS4 board and ACDP host.

Power on ACDP.


Part 2: Mini ACDP operation on Mobile phone
Open "Mini ACDP".

Click on "BMW".

Cas4 /CAS4+


The second option (Select according to CPU model).


IMMO

Read CAS4 EEPROM


Read the note.

Automatic pin detection.
If the detection fails, please check and clean up the test points.



Decrypting chip, please wait..



Check the VIN number.


Automatically upload and backup data.



The CAS4 PCB is processed

Automatic enter the "Add key" function.


Connect BAV-key adapter and put it into the blank key.

Please check the blank key ID.


Please select the CAS data you want.

Check the VIN number.


Choose any blank key number.


Take out the blank key and put in the working key.


Reading ISN code.

Check ISN code and VIN number.


Put in the blank key again.

Key programming...and succeed soon.
Please learn the new key on car according to prompt.

Job is done.

YANHUA ACDP adds CAS4 key in the way of ICP perfectly.
Source:http://blog.obdexpress.co.uk/2019/06/06/yanhua-mini-acdp-how-to-set-the-board/