Yanhua Mini ACDP read BMW MSV90 ISN without open DME shell

 Question:

Is it possible to read BMW MSV90 ISN by Mini ACDP without opening the shell of DME? If can, how to?

OBDEXPRESS.CO.UK engineer replied:

Yes. ACDP Module 27 is required. It comes with interface boards and A51E license, and works well with Mini ACDP to quickly perform BMW E/ F chassis MSV80, MSD80, MSD81, MSD85, MSD87, and MSV90 DME (Continental/Siemens) ISN reading/writing and cloning via bench mode.

Easy operation guide:

The connection diagram can be checked from the Help document.

Step 1: Prepare all accessories below

• MSV90 interface board (ACDP Module 27)
• 20PIN cable
• ACDP host
• OBD+ICP adapter

Step 2: Plug the MSV90 interface board correctly into MSV90 DME

Step 3: Short the CAN resistor on the OBP+ICP adapter to the 'CAN-R Join'

Step 4: Connect ACDP, OBP+ ICP adapter, interface board and DME

Operation path on Mini ACDP APP:

Tap BMW>> DME ISN>> BENCH MODE Read/Write DME ISN>> SIEMENS/Continental DME>> Fxx>> select the option based on the engine model (i.e. N52 MSV90)>> Read ISN

Make sure the connection between ACDP and DME is good

Read the system information and save the screenshot

Read the IMMO info successfully and take a screenshot, then click Export

Remember the file storage path

Click Save on the bottom right corner

ISN data is exported successfully.

Reading ISN data finished!

Yanhua Mini ACDP Module 27 with license:

https://www.obdexpress.co.uk/wholesale/yanhua-acdp-module-27-for-bmw.html

Yanhua Mini ACDP Programming Tool:

https://www.obdexpress.co.uk/wholesale/yanhua-bmw-mini-acdp-key-master.html

Yanhua module 9 duplicate 2011-2019 JLR key via OBD step

 This is a tutorial on using Yanhua Mini ACDP + Module 9 to duplicate 2011–2019 Land Rover/ Jaguar key via OBD step by step. Read this post carefully to learn how to do.

Preparation

Mini ACDP Master

JLR KVM Module 9

Double CAN Adapter

Working key

Blank new key

Connect ACDP host, BAV-KEY adapter, double CAN adapter & vehicle OBD port.

Procedure

Mini ACDP >> Jaguar/Land Rover >> OBD duplicate key/all key lost(2011–2019) >> Program key(ADD key) >> Continue

Check the vehicle version info, press "Continue".

It's recommended to take a screenshot to save the info.

Connect the BAV-key adapter to the ACDP.

And put the unlocked working key correctly on the BAV-key adapter!

Press "Continue".

Check the key info, press "Continue".

The working key ID is AEBD5235. This key is still in my hand.

Select the lost key channel: Key1

Connect the BAV-key adapter to the ACDP.

And put the special key that can change ID correctly on the BAV-key adapter!

Check key info, press "Continue".

Programming key data…

Writing system data…

The file is backed up.

Completed.

www.obdexpress.co.uk

Yanhua Mini ACDP add BMW CAS4/ CAS4+ key in OBD/ ICP mode

 This is a guide to add BMW CAS4/ CAS4+ key with Yanhua Mini ACDP in OBD/ICP mode. Read it carefully to learn how easy it can do.

BMW CAS4/4+ Add Key via OBD

Connect ACDP programmer with vehicle OBD port.

Mini ACDP>> BMW >> CAS1–4 >> CAS4/CAS4+ >> OBD mode >> IMMO/Mileage >> Add key(Automatic mode) >> Continue

Please check the system info, like VIN, mileage, system status and other vehicle info.

Press "Continue".

Detect to the ECU does not pre-process, please preprogram first.

Press "Continue".

Please save the original coding data.

Pre-process ECU system finished.

Please backup CAS data file.

Please put the working key close to the emergency start sensing antenna position(located at the steering wheel right hand).

Check IMMO info like ISN, VIN, press "OK".

Choose any unoccupied key channel displayed as FF.

Put the new blank key close to the emergency start sensing antenna.

Generate new key finished.

BMW CAS4/4+ Add key on Bench

* Users can click "Help" to check connection diagram.

Remove CAS4 module from vehicle. It's under the steering wheel.

- Tools Required

CAS4 module

CAS4 copper pillar

CAS4 interface board

BDM adapter

Working key

New blank key

20PIN cable

BAV-KEY adapter

OBP+ICP adapter

ACDP host

- Installation

Install the copper pillar.

Align D1-D4 test points. Vertical press down the CAS4 interface board. As long as the 4 test points are aligned, then all test points are aligned.

Lock the board with copper pillar & PCB lock, connect all together.

Power up the ACDP.

- APP Operation

Mini ACDP >> BMW >> CAS1–4 >> CAS4/CAS4+ >> ICP model >> ICP 9S12XEP100(Mask 5M48H/1N35H)

(It's always good to click Help. You can find out where the mask ID is.)

IMMO >> Read CAS4 EEPROM >> OK

Pin detection passed. If the detection fails, please check and clean the test points.

Press "OK".

Check the VIN number and CAS4 version. Press "OK".

Save original DFLASH data.

Reading data successfully!

Mode1: add key(with work key)

Please connect the BAV adapter and put in the blank key.

Select the original DFLASH data.

Choose the unoccupied key channel displayed as FF.

Take out the blank key from the coil and put in the working key instead.

Vehicle info was read out.

Take out the working key and put in new key. Press "OK".

Programming key successful!

You can put the CAS4 module back to the vehicle. And insert the new key into the key slot for learning. Start the car with new key.

Remember to save the CAS data. This data contains info of old key & new key.

www.obdexpress.co.uk