YANHUA ACDP MINI: June 2023

Monday, June 12, 2023

Yanhua module corrects mileage for VW Audi 0BH Continental

Yanhua Mini ACDP + Module 30 is able to do VW/Audi DQ500(0BH Continental) gearbox mileage correction. For users who already owned module 19 or module 25 can open the Mileage Correction License directly. Read this guide to learn the procedure.

Accessories Required

TCM

ACDP Programmer

0DE interface board

DB15-LAN adapter

TCU cable

How to connect?

Connect the 0DE interface board toDB15-LAN adapter, short circuit the CAN resistor of DB15-LAN adapter to the "CAN-R" end.

Unplug the original gearbox plug, install the 0DE interface board tovehicle TCU plug. Connect to the ACDP device and power it up.

VW Audi 0BH Continental Mileage Correction via Yanhua ACDP

How to adjust VW/Audi 0BH Continental mileage?

Connect ACDP to a stable WiFi.

Mini ACDP>> VW >> Gearbox mileage correction >> Audi >> DQ500(0BH CONTINENTAL) >> Identify

Make sure using the ACDP power(voltage+ 12V, current > = 2.5A).

Confirm connect the ACDP with gearbox.

Check the mileage and time of the original TCU.

Mileage: 1000km, system run time: 250h, click "OK".

Identify finish.

VW Audi 0BH Continental Mileage Correction via Yanhua ACDP

Mileage correction(auto mode) >> OK >> Continue >>Confirm the system info, OK >>Click "OK" to save the EEPROM data.

Enter the new mileage: 14000km

Click "OK".

*Attention: Ready to write chip data, please don't cut the power nor pull out the device during the programming! Click "Continue".

Correct mileage finish.

Time correction(auto mode) >> OK >> Continue >>Confirm system info, OK>> Save EEPROM

Enter the new time hours: 350h

OK >> Continue

Correct time finish.

Go back to identify system info again.

The mileage and system run timewere changed.

This is how to do VW/Audi0BH Continental odometer correction with Yanhua ACDP.

VW Audi 0BH Continental Mileage Correction via Yanhua ACDP

www.obdexpress.co.uk

Here we have collected a total of 30 Yanhua ACDP Modules info in this post. Different modules can be used with Mini ACDP for different car models covering BMW, Mercedes- Benz, Jaguar, Land Rover, Porsche, Volvo, VW/AUDI, GM to perform key programming, key refresh, mileage reset, gearbox clone, DME ISN read/write, and battery restore, etc.

How to Choose Yanhua Mini ACDP Module

Yanhua Mini ACDP Module support list:

How to Choose Yanhua Mini ACDP Module

Note:

All above modules cannot work alone. They need to work with Yanhua Mini ACDP Master basic module.

If you have ACDP Master basic module already, you can choose the module you need alone, and then activate it on your ACDP Master. Check Two Methods to Get Yanhua ACDP Module Authorization Card Number Automatically.

How to use Yanhua Mini ACDP Module?

Most of the module usage guidelines are collected for reference below.

Continue to be updated…

Yanhua ACDP Module 1:

Yanhua Mini ACDP Adds BMW CAS4 Key OBD/ ICP Mode

Yanhua ACDP Module 1 and Module 27:

Yanhua Mini ACDP BMW Replace DME: Read & Write CAS ISN via ICP

Yanhua ACDP Module 2:

Yanhua ACDP Mileage Correction for BMW FEM BDC

Yanhua ACDP Module 3:

Yanhua Mini ACDP Program BMW FEM/ BDC All Keys Lost

Yanhua ACDP Mini Read Write MSD80 / MSD802 DME ISN