Yanhua Module 28 Gearbox Clone: JLR ZF-9HP

 Yanhua Mini ACDP + Module 28 is able to clone ZF-9HP gearbox BOOT mode, support Jaguar, Land Rover, Chrysler, Dodge, Fiat, Honda, Jeep, etc. Follow the tutorial to learn the procedure.

*Users can check connection diagram in "Help".

Accessories Required

ACDP host

OBP+ICP adapter

20PIN cable

8PIN cable

ZF-9HP-Port interface board

ZF-9HP-BOOT interface board

Copper pillars

Screwdriver

ZF-9HP gearbox computer

Connection

Remove the 3 screws of the interface board, install the copper pillars. Put the CPU positioning frame on the CPU.

Install ZF-9HP BOOT interface board. Lock it with copper pillars. Install ZF-9HP port interface board. Connect 2 interface boards with 8PIN cable.

Connect OBP+ICP adapter with 20PIN cable.

Short the CAN resistor on the OBP+ICP adapter to the "CAN-R-JOIN" side. Connect to ACDP host.

Operation

Step1. Backup Data

Mini ACDP>> Jaguar/Land Rover >> Gearbox clone >> ZF_9HP(BOOT) >> Identify >> Continue

Confirm system info.

BOOT pin status detection passed.

Continue >> Continue >> OK

Identify system info finished.

Full backup data >> Continue >> Continue >> Continue

Save data file.

Step2. Write Data

Connect another ZF-9HP gearbox computer.

Full write data >> Continue >> Continue >> Continue >> Load data file

Ready to write chip data, please don't cut the power nor pull out the device during the programming!

Click "Continue".

Writing chip data finished.

www.obdexpress.co.uk

Can Yanhua module 9 support copy keys for after 2019 JLR?

 Can Yanhua module 9 copy all 2011–2019 JLR keys by obd?

Yanhua engineer replied:

Generally supported, but there is one thing to note: The 2019 JRL series keys have undergone a style change, and the original keys are similar to the picture below.

And the new style key is like this:

As long as it is a JLR key whose style has not changed (old JLR key), it can be copied by using Yanhua module 9 + Double CAN Adapter.

Yanhua products also support JLR keys after the style change, but not module 9, but module 24.

The expansion module of Yanhua Mini ACDP supports more functions. If you don’t know which module is suitable for your car, you can contact us for support:

Email: sales@OBDexpress.co.uk

WhatsApp: +86 18750906257

Skype: obd2express.co.uk

Mercedes-Benz VGS-NAG3 9GTronic Gearbox Clone by Yanhua Mini ACDP Module 19

 Yanhua Mini ACDP with Module 19 can clone gearbox for all ZF 8HP, VW/ Audi DQ380/ DQ381 0DE, Mercedes-Benz 9GT (VGS-NAG3), BMW 7-dual-clutch (GETAG 7DCT) and BMW 7-dual-cluthch (TEMIC DKG). Here share the guide to clone gearbox on Mercedes-Benz 9G Tronic VGS NAG3 using the Yanhua ACDP interface board without soldering.

Prepare all devices:

ACDP host, DB15-LAN adapter, SH725XX interface board, PTCU cable and VGS-NAG3 (9 Tronic) gearbox

Correct connection diagram:

Connect the interface board correctly to the gearbox interface

Short circuit the CAN resistor on the DB15-LAN adapter to the CAN-R side

Connect ACDP, DB15-LAN adapter, interface board and gearbox

Supply power with the power adapter

Note: the connection diagram can be found in the VGS_ NAG3 9G Tronic function help document in Mini ACDP APP.

First step, go to read and save original gearbox data.

Run Mini ACDP app

Tap Benz>>Gearbox clone/refresh>> C Class>> VGS_NAG3 (9GTronic)>> Full Backup Data

Make sure that the ACDP device is connected to the gearbox

Record the Boot version and Bosch part number

These two numbers of the new gearbox need to be the same as the original one

Make a screenshot to save the system information as well

Continue to read chip data

Save the data read out

Second step, go to write data with a new gearbox

Connect a new VGA NAG3 9G Tronic gearbox with ACDP interface board

Tap Full Write Data

Check if the two numbers of the new gearbox need to be the same as the original one

Make a screenshot to save the system information

Select chip data file

Choose the chip data file that saved in the previous step

Write data finished.

Finally, install the new gearbox cloned by Mini ACDP with module 19 back to the vehicle and test.

www.obdexpress.co.uk

Digimaster3 Corrected 2005 Nissan Altima odometer

 I have received yanhua digimaster 3 and used it to correct odometer on my 2005 nissan altima. But it failed and prompted 'Wire reversal' and 'Abnormal power'. How to fix the problem?

obdexpress.co.uk engineer replied:

The chip clip is not clamped properly, so the pin detection fails.

Please adjust chip clip and press test again.

Follow the video to connect Yanhua solderless adapter, Digimaster iii and instrument correctly.

https://youtu.be/q-7T__Yn9z0

Use power cables to connect Digimaster 3 and solderless adapter

Then use chip clip or Yanhua Puncture Socket connect the chip and Yanhua solderless adapter

The red line needs to match Pin 1 of the chip

Select the corresponding chip model through 'CHOOSE' on the adapter

When pass the pin detection, connect the adapter and digimaster 3.

Then choose meter system, car brand, car model to change the mileage.

 

Yanhua Mini ACDP Puncture Socket correct connection diagram:

Tech support: www.obdexpress.co.uk

How to refresh Benz VGS2-NAG2 gearbox with Yanhua Mini ACDP

 Yanhua Mini ACDP + Module 16 can support to refresh Mercedes Benz 722.9 VGS2-NAG2 & VGS3-NAG2 gearbox. This is to show the procedure by refreshing VGS2-NAG2 gearbox as example.

Tips: Users can click "Help" to check connection diagram before operation.

Note: Make sure gearbox model is correct.

Tools Required

VGS2-NAG2 gearbox

VGS2/3-NAG2 interface board

OBP+ICP adapter

ACDP host

20PIN cable

Connection

Install the interface board.

Short circuit the CAN resistor on the OBP+ICP adapter to the "CAN-R Join".

Connect all together correctly.

Procedure

Mini ACDP >> Benz >> Gearbox clone/refresh >> C class >> VGS2_NAG2 >> Refresh

Connect ACDP with the gearbox, click "Continue".

Check "Personalized"&"Activated" are YES. That means the gearbox has not been refreshed.

Confirm the system info, click "Continue".

Record the system info file storage path.

Choose a method to get password:

automatic calculation erase password/ manually input erase password.

Click "Continue".

The online password calculation is about to begin. During the password calculation process, it is forbidden to unplug or plug the device and please keep the device connected to internet!

Ready to erase data, please don't cut the power nor pull out the device during the programming!

Erasing system data, please wait…

Erase system data finish.

Back up log file.

Identify >> Continue

Make sure "Personalized"&"Activated" are NO. That means the gearbox data has been erased.

Identify system info finish.

Done.

This is how to refresh Mercedes VGS2-NAG2 gearbox with Mini ACDP Master.

www.obdexpress.co.uk

How does Yanhua ACDP do VW & Audi mileage correction?

Can Yanhua Mini ACDP supports to do VW/Audi gearbox mileage correction? The answer is yes. Only to have A605 License, by working with ACDP Module 13 or Module 21 to easily realize. Supports VW/Audi DQ200(0AM/0CM), DQ250(02E/0D9), DL382(0CK), VL381(0AW) mileage adjustment.

How to correct VW/Audi gearbox mileage?

Connect ACDP programmer to vehicle OBD port.

Mini ACDP>> VW >> Gearbox mileage correction >> Audi >> Detect module info

Connect ACDP with gearbox, click "OK".

Check gearbox info, it's DQ380(0DE).

Required Tools:

ACDP Programmer

SH725XX-0DE interface board

DB15LAN adapter

TCU cable

Connect the interface board.

Pull DB15LAN adapter's button to the CAN-R side.

Connect the power charge & vehicle gearbox.

DQ380(0DE) >> Mileage correction(auto mode) >> Continue

Check system info, original mileage:13608km

Click "Continue".

Save EEPROM data.

Enter new mileage: 6767km

Click "OK".

Ready to write chip data, please don't cut the power nor pull out the device during the programming!

Click "Continue".

Correct mileage finish.

How to correct system run time?

Time correction(auto mode) >> Continue

Check system info, system run time: 6666 hours.

Click "Continue".

Save EEPROM data.

Enter new run time: 1206hours

OK >> Continue

Correct time finish.

Check the correction info.

Identify >> Continue

System info have been changed:

Mileage: 6767km, system run time: 1206hours.

Done.

This is how to do VW/Audi gearbox odometer correction with Yanhua ACDP.

www.obdexpress.co.uk

Can Yanhua tools support 35128 chip?

 Hello everyone, I used Yanhua module 4 to erase the 35128 chip. Will red dots appear when erasing the chip data under normal circumstances?

Yanhua engineer replies: 35128 chip has two kinds of data (V1 and V2)

V2 can directly wipe data without red dots.

V1 cannot directly erase data, and the analog chip needs to be replaced. Users can use Yanhua 35XX programmer + Simulator to read and modify data with Yanhua Mini ACDP or Digimaster 3.

Thanks for the reply from the engineer, one more question: I put can file wrong, it jumped back mileage. Then i try make again, but cannot read or write. Can the simulator only change the mileage once?

Yanhua engineer replied:

The simulator can modify the mileage many times, but chip soldering is not an easy task. If the chip is soldered many times, the chip is easy to break.

It is recommended that you check whether there is a problem with the soldering of the chip. If there is no problem, you should consider whether the chip is damaged.

Technical support: obdexpress.co.uk