Simple guide on how to use Yanhua Mini ACDP to adjust mileage for G05.
Yanhua chief engineer replied:
You need to change the Simulator.
Please follow this guide to do, it shows how to exactly use Yanhua YH35XX Programmer + Simulator to read write 35128WT:
http://blog.obdexpress.co.uk/2019/06/03/yh35xx-programmer-simulator-user-manual/
Someone has the same question as you and did a good job by following the above operation guide:
Have fun!
Have Yanhua Mini ACDP, used it to program new key when all keys lost: Bmw m4/m3 2016-2019 (F chassis) , Bmw x5 2014-2017 (F chassis, for the car after 2018 year, it is G chassis and not work) , Bmw 1 series 2015-2019 (all are F chassis).
Need:
Image 1. There are mainly 4 kinds of Bench Interface board
It depends on what type of DME.
Please look at the following table
http://blog.obdexpress.co.uk/wp-content/uploads/2021/04/BMW-DME-Statistics.pdf
Question: How do I know which board to use? Such as B48 B38 etc. Does it say it on CAS unit.
Please enter the VIN here to check what type of DME.
Is this system connected to BMW or own software from China?
You can check in this site, tick off VIN and Enter the last 7 digits of VIN
http://www.bmwsteelart.com/index/result/T/BMW/M/49514/VIN/P039949/HG/12.html
Enjoy!
Confirmed: Disco 4 2016 Locked KVM Add Key successfully with Yanhua Mini ACDP and Module 9.
Images mean a lot:
Alright, Yanhua Mini ACDP and Module 9 is amazing, highly recommend it.
Yanhua Mini ACDP programmer is tested to be the best machine for mileage correction on BMW models. BMW instrument calibration is mainly distinguished according to the chip, it covers BMW full series CAS1-CAS4+, FEM/BDC, 080DOWQ/T, 160DOWQ/T EEPROM etc, you can refer to the images below.
In details.
Yanhua Mini ACDP Mileage Correction for BMW CAS1-CAS4+
Requires: Yanhua ACDP Module 1 CAS Module
Features:
No need to remove chip
No need soldering
No need to cut the line
No need to lift the pin
Yanhua Mini ACDP BMW FEM BDC Mileage Correction:
Requires: Yanhua ACDP Module 2 FEM BDC module
Firstly, reset the FEM/BDC kilometers to zero, and then adjust the kilometers of the instrument chip.
In details:
http://www.mileageprogrammer.com/bmw-fem-bdc-mileage-reset-on-bench-with-yanhua-acdp/
Yanhua Mini ACDP mileage correction for BMW 080DOWQ/T, 160DOWQ/T, M35128wt EEPROM
Requires: ACDP Module 4
Supported chip list:
Enjoy!
What's all your thoughts on the Digimaster iii d3 original for mileage correction. It's between Digimaster 3 original and obdstar odomaster. Unless you got any to throw in the choice. Don't know which to buy. Need to cover old and new. I've heard obdprog 500m, But I've heard the updates are few and far between.
Quote some experienced users' point of view:
Digimaster iii d3 original is a good tool but it’s not for beginners, you have to be very handy and technical to use it, I had to make a lot of connecters for it...
For the price, it’s worth it.
It do a lot of new cars, it’s worth getting, if U want something better than that you have to spend over 7k.
They update it every few months, they always add new cars to the list.
But you will also need one of them obd tools, like obdstar x300m, it’s around $200 or the new version of it odomaster, and a cheap Digiprog 3.
Enjoy!
Update! Yanhua Mini ACDP adds module 15 to perform Mercedes Benz DME clone, no need to open DME shell, no need to drill hole on DME, no need to plug wire. The special interface board connection method replaces the traditional plugging wire method to prevent plug wire to opposite direction and wrong place, simple and efficient, plug and play, safe and reliable.
Yanhua Mini ACDP Mercedes Benz DME clone coverage:
MB-DME-ADAPTER XI supports DME clone of Mercedes-Benz 152/157/274/276/278
(MED17.7.3), 272/276 (MED17.7.3.1), 276/278 (MED17.7.1), etc,
MB-DME-ADAPTER X2 supports DME clone of Mercedes-Benz 133/270/274
(MED17.7.2), etc.
MB-DME-ADAPTER X3 supports DME clone of Mercedes-Benz 260/264 (MED17.7 7),etc.
MB-DME-ADAPTER X4 supports DME clone of Mercedes-Benz diesel vehicle 642 (EDC17CP01), 642/651 (EDC17CP46), 626/622/651 (EDC17C66),
651/642(EDC17CP57), 651/642(EDC17CP10),etc.
MB-DME-ADAPTER X5 supports DME clone of Mercedes-Benz 272/279 (ME17.7),etc
MB-DME-ADAPTER X6 supports DME clone of Mercedes-Benz diesel vehicle 642/654 (MD1CP001),etc.
MB-DME-ADAPTER X7 supports DME done of Mercedes-Benz 177/178 (MED17.7.5)，etc.
MB-DME-ADAPTER X8 supports DME clone of Mercedes-Benz CLS/GT
(MG1CP002),etc.
Yanhua Mini ACDP Mercedes Benz DME clone APP screen shoot:
How to connect the adapters before operating Yanhua Mini ACDP Mercedes Benz DME clone?
Step 1. Please prepare ACDP, OBP+ICP adapter, interface board and DME.
Step 2. Connect the interface board correctly to the DME interface as shown.
Step 3. Short the CAN resistor on the OBP + ICP adapter to the “CAN-R Join”.
Step 4. Connect ACDP, OBP+ICP adapter, interface board and DME.
Enjoy!
http://blog.obdii365.com/2020/09/23/yanhua-acdp-mercedes-dme-clone/
YANHUA MINI ACDP MPS6 gearbox clone is a special interface board connection method replaces the traditional plugging wire method to prevent plug wire to opposite direction and wrong place, simple and efficient, plug and play, safe and reliable.Support: Volvo, Land Rover, Ford, Chrysler, Dodge, etc.
Here is the OBD operaition interface :
