Guide on Mini ACDP BMW 8HP ISN Clear (E Chassis)

 

Yanhua Mini ACDP update "8HP ISN Clear (Support E Chassis)" (i.e BMW E model 2011 X6 EGS 8HP reset). This article is on how to operate.  

 

Need to own first:

1. Yanhua Mini ACDP basic module: $159

 

2. 8HP ISN Clear (Support E Chassis)authorization: 69USD

 

2. Module 11 BMW-CAS4 Interface Board (supposed to have module 11 first, then 8HP ISN Clear authorization): $30.99

 图1

Total price: $258.99

 

Next is the hardware connection (incl. YH ACDP, adapters, module and BMW car):

Option 1:  

Step 1. Prepare ACDP, OBP+ICP adapter, EGS interface board and EGS module.

 

 

Step 2. Connect the 8HP end of the EGS interface board to the EGS module interface.

 

Step 3. Short the CAN termination resistor on the OBP+ICP adapter to the “CAN-R-Join” terminal.

 

Step 4. Connect the ACDP, OBP+ICP adapter, EGS interface board and EGS module.

Option 2: Connect ACDP with vehicle OBD-II port.

 

Option 3: Please connect ACDP to EGS interface according to the diagram.

 

 

Next is the operation on one computer / Android / IOS phone:

 

Prepare: MiniACDP software download (PC software or Android online APP)

 

Select "BMW".

Select "EGS refresh".

 

Select "8HP ISN Clear (Support E Chassis)".

 

 

Function menu:

EGS State

Clear ISN

Reset adaptatio

Upgrade program

Modify VIN

 

 

Go on...

 

 

www.obdii365.com

 

Will Mini ACDP correct odometer on 2014 BMW F series need simulator?

Question: when using Yanhua Mini acdp to correct odometer for 2014 BMW F series, does it require the Yanhua Simulator?

 

Yanhua chief engineer replied:

Generally, it doesn't need the simulator.

But it mainly depends on the chip model, 35128WT and 35160WT need the simulator.

The dashboard of these two chips are new cars after 2017.

 

Question:

Only need the simulator or also need Yanhua 35XX programmer?

Answer: Need both Yanhua YH35XX Programmer + Simulator

 

Please read this article on how to use Yanhua YH35XX Programmer+ Simulator:

http://www.mileageprogrammer.com/yh35xx-programmer-simulator-correct-odometer/

 

Good luck!

 

 

Source:http://www.mileageprogrammer.com/will-acdp-correct-odometer-on-bmw-f-need-simulator/

Yanhua Mini #ACDP BMW DME Adapter X5 X7 X4 X8 Interface Board

📣📣📣Yanhua Mini #ACDP BMW DME Adapter X5 X7 X4 X8 Interface Board is coming

No need to open DME shell, no need to drill hole on DME, no need to plug wire.

🔺X5 X7

https://www.obdexpress.co.uk/wholesale/yanhua-mini-acdp-bmw-x5-x7-dme-interface-board.html

1: Support #BMW E chassis N47 (EDC17C06 ) diesel DME ISN read, write and clone.👌

2: Support BMW E chassis N57 (EDC17CP09), F chassis N57 (EDC17CP09) diesel DME ISN read, write and clone.👌

🔺X4 X8

https://www.obdexpress.co.uk/wholesale/yanhua-mini-acdp-x4-x8-interface-board.html

Support BMW #MINI R chassis N12 (MEV172) / N14 (MED172) DME ISN read, write and clone.👌

Support BMW E chassis N45 (MEV1721) / N46 (MEV1721) DME ISN read, write and clone.👌 



BMW X4 DME ISN Read / Write 



BMW X8 DME ISN Read / Write 




Yanhua Mini ACDP BMW DME X8 Display


Yanhua Mini ACDP BMW DME X4 X5 X7 X8 Display

YANHUA New Arrival!BMW F/G chassis odometer wiring harness

YANHUA TECH BMW F/G chassis odometer wiring harness

Good helper of resetting odometer

YANHUA BMW F/G  odometer wiring harness  Function:
Use BMW F/G chassis odometer wiring harness connects the odometer  and power the wiring harness. Press the wake-up button which is locat­ed in the lower left corner of the odometer to light up the instrument and check the mileage.

Operation skills:
If resetting odometer needs to replace simulate chips and install filter, reset the simulate chips first, and then use BMW F/G chassis odometer wiring harness light up the odometer, to ensure odometer resetting is success, and then install filter. Use BMW F/G chassis odometer wiring harness light up odometer after the filter is installed, and then install odometer back to the car after confirm it shows normal. After the odometer which needs to replaced simulator chip or installed filter been reset and installed back to the car, this operation method can avoid problems such as odometer screen go blank or could not lighted up or shows red dot.

you can get Best price  here:
https://www.obdexpress.co.uk/wholesale/yanhua-bmw-f-g-odometer-wiring-harness.html

Yanhua ACDP BMW Full Reviews

Please read these Yanhua ACDP Full Auth reviews, after that you will have idea if it is worth to have.

 

@ droidwayne65 review

It's worked fine for me so far but I use it only for EGS stuff.

 

@ PixelsFixed

Well I've used it for:-
CAS3+ reading and writing flash and eeprom. Excellent
FEM/BDC spare keys. Spot on.
Cas4 AKL and spare keys. Spot on.
Locked JLR KVM. Spot on.
FRM Repairs. Again, spot on.

It's becoming one of my favorite tools.

 

@ Jimmy07

Done a few CAS3+ and 16 Jag XF with no issues
I never buy Chinese tools direct from China. Yes you will pay more buying from a local supplier but you have some support and can return the tool if it breaks.

 

also CAS4/4+ no issues

 

@DayvG

I bought one purely as it was cheap, I needed something for my Comfort Access retrofit that could make keys and read the CAS. This was £300ish and does everything I need. It makes keys flawlessly on CAS4 over OBD. I know it's not the most expensive but keys over OBD is a great option!

 

Update:

I bought an ACDP mini purely to create new CAS4 keys for my F10 and to clone my CAS4 for a comfort access retrofit. CAS clone worked great and was successful in adding new keys to donor CAS after cloning as well as original keys working ok. Reading CAS4 via ICP working first time every time and I have had no failures or errors. The issue with my method was that cloning the original CAS4 also copied the HWAP which rendered the Comfort Access aspects of the donor CAS inoperable. The solution was given by a friend who decrypted the CAS using a different tool, I think Autohex. I still had to provide the DME ISN for him from ACDP in order to decrypt the CAS data.

ACDP has some usable functions but its certainly not a professional tool. I don't use the mobile interface, I use the PC software.

 

@willisodhiambo

True, ACDP is one of the best tools. No soldering and does what it needs to for key making and icp reading of cas.
Explorer is the most cumbersome (you need keytag tool, Ecu explorer needs that you open dme's e.t.c) but one of the best all round tool, Autohex makes things as easy as can be and also one of the best all round.

 

@MarioIL

I have the newest one my ACDP is only 2 months old. bought FULL BMW ACDP PACKAGE.

CAS3-4 keys no problem with ACDP icp mode of course
FRM repair also works good

 

Update:

I used ACDP  for few keys and coping f series ecus had no issues with that,
tried bdc for key programming wouldn't connect to bdc via adapter
need more testing but so far for keys on cas4/3 it works good.

 

Update:

Just did CAS4  KR55WK49663 key yesterday worked like a charm, I need to test it on fem and bdc but CAS never had any issues. I also use it from iPhone

 

To be upgrading...

 

http://blog.obdexpress.co.uk/2020/05/19/yanhua-acdp-bmw-full-reviews/

How to use Yanhua ACDP to renew BMW CAS2?

Question: Hey on BMW cas 2 to write data can I solder directly to the board since I don’t have adapter?

My purpose is to renew cas.

Look the image 1 of ACDP option and the pinout:

Yanhua ACDP chief engineer replied:

You can read the CAS2 data by inserting ACDP MINI to the car’s OBD2 port.

If the CAS2 is dismantled, please buy one extra ACDP module 1 inside there is one BDM-ICP adapter, use it to read out the CAS2 data and to renew.

Image 3: yanhua mini acdp module 1

Image 4: BDM-ICP adapter

Source:http://blog.obdexpress.co.uk/2020/04/16/how-to-use-yanhua-acdp-to-renew-bmw-cas2/