Yanhua ACDP Add Key for Disco 4 2016

 Confirmed: Disco 4 2016 Locked KVM Add Key successfully with Yanhua Mini ACDP and Module 9.

Images mean a lot:

 

Alright, Yanhua Mini ACDP and Module 9 is amazing, highly recommend it.

Recommended by BMW Mileage Correction Tool: Yanhua Mini ACDP

 Yanhua Mini ACDP programmer is tested to be the best machine for mileage correction on BMW models. BMW instrument calibration is mainly distinguished according to the chip, it covers BMW full series CAS1-CAS4+, FEM/BDC, 080DOWQ/T, 160DOWQ/T EEPROM etc, you can refer to the images below.

 

In details.

Yanhua Mini ACDP Mileage Correction for BMW CAS1-CAS4+

Requires: Yanhua ACDP Module 1 CAS Module

Features:

No need to remove chip

No need soldering

No need to cut the line

No need to lift the pin

 

Yanhua Mini ACDP BMW FEM BDC Mileage Correction:

 

Requires: Yanhua ACDP Module 2 FEM BDC module

 

Firstly, reset the FEM/BDC kilometers to zero, and then adjust the kilometers of the instrument chip.

 

In details:

http://www.mileageprogrammer.com/bmw-fem-bdc-mileage-reset-on-bench-with-yanhua-acdp/

Yanhua Mini ACDP mileage correction for BMW 080DOWQ/T, 160DOWQ/T, M35128wt EEPROM

 

Requires: ACDP Module 4

Supported chip list:

Enjoy!

Yanhua Digimaster 3 Vs. obdstar odometer for mileage correction

What's all your thoughts on the Digimaster iii d3 original for mileage correction. It's between Digimaster 3 original and obdstar odomaster. Unless you got any to throw in the choice. Don't know which to buy. Need to cover old and new. I've heard obdprog 500m, But I've heard the updates are few and far between.

 

Quote some experienced users' point of view:

Digimaster iii d3 original is a good tool but it’s not for beginners, you have to be very handy and technical to use it, I had to make a lot of connecters for it...

 

For the price, it’s worth it.

It do a lot of new cars, it’s worth getting, if U want something better than that you have to spend over 7k.

 

They update it every few months, they always add new cars to the list.

 

But you will also need one of them obd tools, like obdstar x300m, it’s around $200 or the new version of it odomaster, and a cheap Digiprog 3.

 

Enjoy!